Additives
NA-SUL® - Neutral Metal Salts
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-SUL 707 | Lithium Dinonylnaphthalenesulfonate (0.76%) | Low ash rust inhibitor with good high temperature stability in industrial oils and greases. Retards bleeding in lithium soap greases. |
| NA-SUL 729 | Calcium Dinonylnaphthalenesulfonate (2.1%) | Outstanding demulsification properties, excellent filterability (dry and wet), thermal and hydrolytic stability. Highly effective dispersant for solid additives. |
| NA-SUL BSN | Barium Dinonylnaphthalenesulfonate (6.6%) | Non-staining rust inhibitor with outstanding demulsibility at all additive levels. Excellent thermal stability and compatibility with other additives. Outstanding synergy with other antirust additives. |
| NA-SUL MG | Magnesium Dinonylnaphthalenesulfonate (1.3%) | Low ash rust inhibitor with excellent filterability and hydrolytic stability. Synergy with other antirust additives. Promotes the formation of highly water-resistant films. |
| NA-SUL SS | Sodium Dinonylnaphthalenesulfonate (2.4%) | Forms a highly polar, hydrophobic film which is strongly bonded to metal surfaces. Solubility characteristics allow use in oil or water systems. Does not emulsify or demulsify. |
| NA-SUL ZS | Zinc Dinonylnaphthalenesulfonate (2.8%) | Excellent demulsibility, thermal and hydrolytic stability. Good filterability (dry and wet). Synergistic with ZnDTPs and antioxidants. |
NA-SUL® - Basic Metal Salts
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-SUL BSB | Barium Hydroxide Dinonylnaphthalenesulfonate (11.7%) | Excellent rust and corrosion protection performance. Reserve alkalinity for acid neutralization (TBN 45). Superior demulsibility. Acid neutralizing and deactivating properties. Works as an HCl scavenger when used in combination with chlorinated paraffins. |
| NA-SUL CA-50 | Carbonated Calcium Dinonylnaphthalenesulfonate (3.2%) | Outstanding rust protection performance in fresh and salt water environments. Excellent demulsibility. Reserve alkalinity for acid neutralization (TBN 50). Protection against acid atmosphere. Works as an HCl scavenger when used in combination with chlorinated paraffins. |
NA-SUL® - High Temperature Products
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-SUL BSN-HT | Barium Dinonylnaphthalenesulfonate/ Carboxylate (8,7%) | Excellent thermal and oxidative stability. Outstanding demulsibility. Exhibits outstanding additive compatibility and reduced moisture sensitivity. Low odor. Excellent solubility in highly paraffinic base stocks. |
| NA-SUL CA-1089 | Calcium Dinonylnaphthalenesulfonate/ Carboxylate (2.2%) | Outstanding non-staining properties. Excellent demulsibility, filterability (dry and wet), thermal and hydrolytic stability. Resists gelling when contaminated with water. Excellent solubility in highly paraffinic base stocks. |
| NA-SUL CA-HT3 | Calcium Dinonylnaphthalenesulfonate/ Carboxylate (2.5%) | Outstanding high temperature stability and good demulsibility. Low odor, no characteristic petroleum oxidate odor. Easy handling, no melting required. |
| NA-SUL MG-HT | Magnesium Dinonylnaphthalenesulfonate/ Carboxylate (1.7%) | Offering exceptional rust protection with outstanding high temperature stability. Good demulsibility and low odor. Excellent solubility in a wide range of base stocks. Stabilize chlorinated paraffins regarding HCl corrosivity and staining. |
| NA-SUL ZS-HT | Zinc Dinonylnaphthalenesulfonate/ Carboxylate (3.8%) | Excellent rust inhibitor, particularly in systems with other zinc containing additives. Exhibits antioxidation synergism with primary AOs in petroleum and PAO base fluids. Synergistic with ZnDTPs |
NA-SUL® - Rust Preventive Concentrates
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-SUL CA-1082 | Calcium Dinonylnaphthalenesulfonate/ Carboxylate (1,4%) | Good demulsibility, free flowing liquid, no melting required. Resists gelling in the presence of bulk water. Low odor, does not contain petroleum oxidates. Excellent solubility in highly paraffinic base oils and PAO. |
| NA-SUL CA-1089 | Calcium Dinonylnaphthalenesulfonate/ Carboxylate (2.2%) | Outstanding non-staining properties. Excellent demulsibility, filterability (dry and wet), thermal and hydrolytic stability. Resists gelling when contaminated with water. Excellent solubility in highly paraffinic base stocks. |
| NA-SUL CA-1122 | Calcium Dinonylnaphthalenesulfonate/ Carboxylate (2.4%) | Excellent solubility in highly paraffinic base oils, PAO and vegetable oils. Free flowing liquid, no melting required. Low odor, does not contain petroleum oxidates. |
| NA-SUL CA-1183 | Calcium Dinonylnaphthalenesulfonate/ Carboxylate (2.6%) | Excellent multi-metal corrosion inhibitor, outstanding water displacement properties. Particularly effective on galvanized steel. Resists gelling from water contact, mild odor, no oxidate wax. |
| NA-SUL CA-1259 | Calcium Dinonylnaphthalenesulfonate/ Carboxylate (1.6%) | Excellent water displacement, resists gelling in the presence of bulk water. Minimizing the need for heating prior to use. Improved solubility enables use in a wide variety of diluents. Contains <10% waxy materials. |
| NA-SUL CA/W1146 | Calcium Dinonylnaphthalenesulfonate/ Oxidates/ Metal Soaps/Carboxylacids (2.0%) | Recommended for heavy duty applications, such as sheltered outdoor storage and marine environments. Best in naphthenic oils. Excellent salt fog protection, effective in acid atmospheres. |
| NA-SUL CA/W1177 | Calcium Alkylarylsulfonate/Carboxylate /Oxidated Petrolatum (1.4%) | Very good water displacement. Resists gelling from water contact. Compatible with contamination by most alkaline cleaners and metalworking fluids. Can be combined with waxes and resins for specialty applications. |
| NA-SUL CA/W1213 | Calcium Alkylarylsulfonate/Carboxylate /Oxidated Petrolatum (1.4%) | Liquid, wax containing additive specifically designed for use in harsh environments. Forms extremely hydrophobic thin films giving superior metal protection. |
| NA-SUL CA/W1935 | Calcium Dinonylnaphthalenesulfonate/ Petroleum Oxidate (1.5%) | Relatively low melting point. Useful for both thin and thick film rust preventive fluids. Very good water displacing properties. Improves resistance to water washout of greases. Excellent moisture displacing properties. |
K-CORR® - Non Sulfonate Chemistry
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| K-CORR 1031 | Proprietary Carboxylic Acid/ Amide Chemistry (N 3.3%) | Excellent solubility in low polarity base oils. No detrimental influence on the AFNOR (dry/wet) and FZG performance. Synergistic AW performance with selected EP chemistries. |
| K-CORR 1227 | Mixture of Organic Amino Acid and Imidazoline Derivative | Improves performance in humidity, salt fog. Especially where corrosive residues of combustion form on metal surfaces. Boost CI performance. Effective at low treat levels. |
| K-CORR G-1107 | Proprietary Ashless Rust Inhibitor and Antiwear Additive (N 3.6%) | Metal-free rust inhibitor with excellent AW properties. Especially fulfill severe rust requirements in greases, Emcor seawater test. Good thermal and hydrolytic stability, effective at low treat levels. |
| K-CORR G-1340 | Proprietary Preparation of Zinc Phosphorus Containing Chemistry (Zn 13.1%) | Highly effective, low odor, zinc based rust inhibitor system developed for specialty grease applications as a replacement for zinc naphthenate with minimal effects on other grease properties. |
| K-CORR G-1350 | Proprietary Preparation of Zinc Phosphorus Containing Chemistry (Zn 8.7%) | Cost effective, low odor, zinc based rust inhibitor system developed for specialty grease applications as a replacement for zinc naphthenate with minimal effects on other grease properties. |
| K-CORR G-1370 | Proprietary Preparation of Zinc Phosphorus Containing Chemistry (Zn 13.5%) | Specially formulated to meet stringent rust protection requirements in greases, including Emcor testing with 100% synthetic seawater. Delivers outstanding antiwear performance even at low treat levels. Low odor profile. |
K-White® - Corrosion Inhibiting Pigments
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| K-White G105 | Modified Aluminium Triphosphate | Active pigment with excellent corrosion protection and very low toxicity for oil based systems. Passivates iron and non-iron substrates through binding of unsoluble Phosphate Complexes. |
| K-White 140W | Modified Aluminium Triphosphate | Active pigment with excellent corrosion protection and very low toxicity. Builds insoluble Iron III-Aluminium-Triphosphate-Complexes in water based systems. |
NA-SUL® - water soluble/miscible Sulfonates
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-SUL 437 | Dinonylnaphthalene Sulfonic Acid/ Organic Acid Complex/Amine | Easily cut back in cold and warm water, solutions are clear an very hard-water tolerant. Excellent in CI containing solvents. Deposits a thin film upon metal parts that becomes hydrophobic during drying. Exhibits exceptional storage stability. Ideal for dip application. |
| NA-SUL 1019A | Dinonylnaphthalene Sulfonic Acid/ Organic Acid Complex/Amine | Excellent protection for steel, galvanized steel and aluminium. Ideal for coating metal parts by dipping. Fast drying: Thin, dry hydrophobic film. Excellent hard water tolerance. |
NA-SUL® - water emulsifiable Sulfonates
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-SUL 450 | Calcium Dinonylnaphtalenesulfonate/ Carboxylate/Alkanolamine (0,7%)/Ester | Free of mineral oil concentrate with excellent emulsifiable properties. Good rust protection for steel during storage and transportation. Deposits extremely thin hydrophobic films. Coating @ 5% is dry; Coating @ 10% is nearly dry. |
| NA-SUL 460 | Calcium Alkylaryl Sulfonate with Carboxylates and Emulsifiers | Exceptional performance protecting steel, brass, and aluminum in harsh environments, including salt fog and acid atmosphere. |
| NA-SUL 1101 | Ammonium Dinonylnaphthalenesulfonate/Carboxylate | Highly effective and ashless protection of aluminum and zinc alloys. Low odor, does not contain petroleum oxidates. Excellent solubility in highly paraffinic base oils and PAO. Free flowing liquid, no melting required. Can be emulsified at moderate pH level. |
CORRGUARD® - Alkanolamines
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| AEPD®-85 | 2-Amino-1,3-Ethyl-Propan-Diol (85%) | Primary amino alcohol which provides a good balance of pH development and reserve alkalinity properties. Improved ferrous corrosion protection and excellent for aluminium processing. Acts as a formaldehyde and sulphur odor scavenger. Reacts reversibly with formaldehyde. Reduces cobalt leaching more than TEA. Enhanced performance of triazine biocides. |
| AEPD® VOX 1000 | 2-Amino-2-Ethyl-1,3-Propane-Diol (85%) | Multifunctional primary amine with very mild odor. Low-VOC (< 5g/L), more efficient than other low-VOC alkanolamines. Especially suitable on aluminium. |
| ALKATERGE®-E | 4-Ethyl-2-(8-Heptadecenyl)-2-Oxazoline-4-Methanol | Liquid corrosion inhibitor for iron and steel alloys. Low Foaming. Mild oxidative properties. Primary emulsion stabilizer for water-in-oil emulsions, secondary oil-in-water emulsifier. Non-ionic (stable in hard water). |
| CORRGUARD® SELECT series | 3-Amino-3-Methyl-2-Butanol (75% / 90% / 95%) | New primary amino alcohol with well-balanced performance that provides highly effective multi-metal compatibility and reduces cast iron corrosion, aluminum staining, and cobalt leaching. Highly efficient neutralizer with a high pKa, provides excellent pH stability and enhances microbial degradation resistance when used with registered biocides. |
| CORRGUARD® SELECT LSA series | 3-Amino-3-Methyl-2-Butanol (75% / 90% / 95%) | |
| CORRGUARD SELECT FS LSA | 2-Amino-2-Methyl-1-Propanol, 2-Amino-1-Butanol, 2-Methylamino-2-Methyl-1-Propanol, 2-Amino-2-Ethyl-1,3-Propanediol, 2-Amino-2-Methyl-1,3-Propanediol (88%) | |
| CORRGUARD® series | 2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%) | Very cost efficient neutralizer of acidic ingredients such as carboxylic acids and phosphate esters. Stable emulsion at high pH level with a high base strengh for an extended fluid life. Acts as formaldehyde scavenger. Minimal ammonia release. Minimizes leaching of cobalt and lead. |
| CORRGUARD® LSA series | 2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%) | High performance primary alkanolamine with very low secondary amine content (< 0.75%, meets TRGS 611). Stable emulsions at high pH. Minimal ammonia release, cobalt leaching and foam generation. High base strength. |
| CORRGUARD FS LSA | 2-Amino-2-Methyl-1-Propanol, 2-Amino-1-Butanol, 2-Methylamino-2-Methyl-1-Propanol, 2-Amino-2-Ethyl-1,3-Propanediol, 2-Amino-2-Methyl-1,3-Propanediol (88%) | Low secondary amine content multifunctional amino alcohol for improved aluminum staining performance. Providing efficient neutralization and pH stability. Relatively low viscosity and 100% water soluble. |
| CORRGUARD® FLEX | 2-Amino-1-Butanol,2-Amino-2-Ethyl-1,3-Propanediol (85%) | Unique primary amino alcohol stream suitable for low secondary amine formulations. Improved corrosion control on steel and its alloys. Extends fluid life with a wide range of registered biocides. Effective pH control, easy to handle and easy to formulate (100% water soluble). Meets TRGS 611. |
| CORRGUARD® EXT | 3-Amino-4-Octanol (85%) | Innovative premium neutralizer for Long-Life Metalworking Fluids. Excellent pH stability, low foam generation. Improves corrosion control of iron and steel alloys. Resists extraction into tramp oil. Facilitates formulation of Al-compatible fluids at higher pH. Excellent for low boron and boron-free formulations. Compliant with TRGS 611. |
| DMAMP-80® | 2-Dimethylamino-2-Methyl-1-Propanol (80%) | Tertiary neutralizing amine, can act as vapor-phase corrosion inhibitor for iron and steel alloys in waterborn systems and various aerosol formulations. Very high base strength for neutralizing acids. Suitable for low secondary amine formulations. |
LUVODUR®, EMEROX® - Dicarboxylic Acids
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| EMEROX 1144 | Mixture of C9 and C11 Linear Dicarboxylic Acids | Highly effective corrosion inhibitor for water soluble fluids. Extremly hard water tolerant with a low foaming character. |
| EMEROX 1199 | Mixture of C9, C11 and C12 Linear Dicarboxylic Acids | Highly effective corrosion inhibitor for water soluble fluids. Extremly hard water tolerant with a low foaming character. |
| LUVODUR L 190-50 | 2,4,6-Tri-(6-Aminocaproic Acid)-1,3,5-Triazine | Highly effective corrosion inhibitor for iron protection. Low foaming tendency and good hard water tolerance. No negative effect on EP/AW additive performance. |
| LUVODUR L 190-85 | 2,4,6-Tri-(6-Aminocaproic Acid)-1,3,5-Triazine | Highly effective corrosion inhibitor for iron protection. Low foaming tendency and good hard water tolerance. No negative effect on EP/AW additive performance. |
| LUVODUR L 184 | 2,4,6-Tri-(6-Aminocaproic Acid)-1,3,5-Triazine neutralized with TEA | Ready-to-use corrosion protection with low foaming tendency and excellent air release properties. No negative effect on EP/AW additive performance. |
LUVODUR® - Carboxylic Acid Amides
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| LUVODUR HVC 403 | Carboxylic Acid Amide, based on Primary and Tertiary Amines | Corrosion protection of water miscible cutting fluids. High active substance content. Suitable for mineral oil containing concentrates. Very effective co-emulsifier. |
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| K-CORR® NF-200L | Proprietary Heterocyclic Derivative | Ashless low viscosity YMD. Excellent thermal, hydrolytic stability. Good demulsification properties. Synergistic with primary and secondary antioxidants. Compliance with FDA 21 CFR 178.3570. |
| K-CORR® NF-410 | Sulfur and Nitrogen based Chemistry | Ashless liquid multifunctional additive providing extreme pressure properties and yellow metal protecting properties by scavenging active sulfur. Very good thermal and hydrolytic stability. |
| LUVODUR® CI BTZ | Benzotriazole | Highly effective water soluble inhibitor. Excellent staining and corrosion protection of non NF metals preferrably copper. Soluble in most base fluid of Grp I-V types. |
| LUVODUR CI 39 | 1,2,3-Tolytriazole derivative | Oil soluble metal deactivator with low volatility properties for the protection of any yellow metal. Lower weight loss than Benzotriazole chemistry. High activity also at low treat rates. |
| LUVODUR CI O | N-Oleyl-Sarcosine | Oil soluble corrosion inhibitor for ferrous and non-ferrous metal protection. Water soluble after neutralization with alkanol amines. Forms protective shield even at low treat rates. |
KING Industries - NA-LUBE®
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-LUBE ADTC | Methylene-bis-(Dibutyldithiocarbamate) | Ashless multifunctional additive with excellent EP, AW and secondary AO properties. Outstanding demulsibility and good thermal stability. Excellent solubility properties in highly paraffinic base stocks |
SONGWON - SONGNOX®
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| SONGNOX® L101 | Tetrakis[methylene-3-(3,5-di-tert-butyl-4’-hydroxyphenyl) propionate]methane | Ashless solid with extremely low volatility and high thermal stability. Excellent for greases and synthetic lubricants. Approved by FDA for use in blending food grade lubricants. |
| SONGNOX® L107 | Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate | High molecular weight AO with good thermal stability. Ashless solid with low volatility. Very effective in lubricants based on natural oils. Good deposit control performance in engine oils. |
| SONGNOX® L109 | Hexamethylenebis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] | Excellent thermal stability and high molecular weight. Especially recommended in mineral oil based industrial lubricants. Approved by FDA for use in blending food grade lubricants |
| SONGNOX® L115 | Thiodiethylene bis [3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate] | Ashless solid with low volatility and excellent thermal stability. Provides multifunctional activity as primary and secondary AO. Approved by FDA. |
| SONGNOX® L135 | Benzenepropanoic acid,3,5-bis(1,1-dimethylethyl)-4-hydroxy-, C7-9-branched alkyl esters | Easy to handle liquid with excellent solubility in mineral oil. Provides superior protection against oxidation and deposit formation. |
| SONGNOX® L224 | Dilauryl thiodipropionate | Secondary thioester antioxidant. Decomposes and neutralizes hydroperoxides, formed by auto-oxidation. Synergistic effects in combination with phenolic antioxidants. Solid. |
| SONGNOX® L226 | Ditridecyl thiodipropionate | Secondary thioester antioxidant. Decomposes and neutralizes hydroperoxides, formed by auto-oxidation. Synergistic effects in combination with phenolic antioxidants. Liquid form. |
| SONGNOX® L416 | Tris(2,4-di-tert-butylphenyl) phosphite | Ashless solid with low volatility. Excellent for mineral and synthetic lubricants in transportation and industrial application. |
| SONGNOX® L570 | Mixture of octylated & butylated diphenylamine | Controls lubricants viscosity increase due to oxidation. High nitrogen content and excellent protection against thermo-oxidative degradation. Approved by FDA. |
| SONGNOX® L670 | Bis(nonylphenyl)amine | Excellent protection against thermo-oxidative degradation with effective control over viscosity increase due to oxidation. |
Lehmann&Voss - LUVOMAXX®
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| LUVOMAXX BHT | Butyl Hydroxytoluene | Non-staining hindered-phenolic antioxidant, low molecular weight, may be easily emulsified. Prevents the development of rancidity and the resulting increase, very efficient peroxid radical delayer. |
| LUVOMAXX CDPA | 4-(1-Methyl-1-Phenylethyl)-N-[4-(1-Methyl-1-Phenylethyl)Phenyl]Aniline | High thermal stability. Synergistic with steric hindered phenolic antioxidant and imidazol derivates. |
| LUVOMAXX ODPA | bis(4-(1,1,3,3-Tetramethylbutyl)Phenyl)Amine | High thermal stable aminic antioxidant, easy dispersible. Works as oxygen scavenger. Synergistic effects with steric hindered phenolic AO's. |
| LUVOMAXX SDPA | Diphenylamine Derivate | Very high molecular weight compared to similar aminic antioxidants. Reduced volatility and suitability for use in high temperature applications. |
| LUVOMAXX TMQ | 1,2-Dihydro-2,2,4-Trimethylquinoline/Oligomers | General purpose, high active aminic antioxidant. Excellent resistance to thermo-oxidative ageing, even at lower treat rates, cost efficient. Works as oxygen scavenger. Reduce oil bleeding in glykol based greases. |
KING Industries - NA-LUBE®
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-LUBE ADTC | Methylene-bis-(Dibutyldithiocarbamate) | Ashless multifunctional additive with EP/AW and AO properties. Outstanding demulsibility and good thermal stability. FZG booster. No negative influence on AFNOR filtration. |
| NA-LUBE AW-6110 | Amine Salts of Aliphatic Phosphoric Acid Esters | Multifunctional ashless additive with excellent anticorrosion. Excellent solubility properties, antiwear and EP properties. Light color, low odor, easy to handle. |
| NA-LUBE AW-6110P | Amine Salts of Aliphatic Phosphoric Acid Esters | Multifunctional ashless additive with excellent anticorrosion. Excellent solubility properties, antiwear and EP properties. Light colour, low odor, easy to handle. Lower acid no. than NA-LUBE AW-6110. |
| NA-LUBE AW-6220 | Proprietary Preparation of Amine Phosphate and Heterocyclic Derivative Chemistry | Ashless antiwear additive. Excellent rust, corrosion, and yellow metal deactivation properties. Low treat levels. Excellent solubility properties. Outstanding FZG performance at low treat levels. |
| NA-LUBE AW-6310 | Proprietary Preparation of Sulfur-Phosphorus-Nitrogen containing Chemistry | Multifunctional ashless lubricant additive exhibiting outstanding EP/AW. Rust inhibiting and demulsification properties. Low treat levels and good thermal and hydrolytic stability. |
| NA-LUBE AW-6330 | Proprietary Preparation of Phosphorus-Sulfur containing Chemistry | Multifunctional ashless lubricant additive. Exhibiting excellent EP/AW and AO properties. Used as a substitute for zinc dialkyldithiophosphates. |
| NA-LUBE AW-6400FG | Amine Salts of Aliphatic Phosphoric Acid Esters | NSF HX-1 approved multifunctional additive. Excellent anticorrosion, AW/EP properties. Light color, low odor. Excellent solubility properties. |
Lehmann&Voss - LUVOMAXX®
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| LUVOMAXX ZDTP | Primary Zinc-Dialkyldithiophosphate | Multifunctional additive, improves EP/AW performance by forming an adsorptive multilayer system. Coefficient of friction can be reduced significantly. Acts additionally as primary and secondary antioxidants as well as corrosion protection additive. |
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| AEPD®-85 | 2-Amino-1,3-Ethyl-Propan-Diol (85%) | Primary amino alcohol which provides a good balance of pH development and reserve alkalinity properties. Improved ferrous corrosion protection and excellent for aluminium processing. Acts as a formaldehyde and sulphur odor scavenger. Reacts reversibly with formaldehyde. Reduces cobalt leaching more than TEA. Enhanced performance of triazine biocides. |
| AEPD VOX 1000 | 2-Amino-2-Ethyl-1,3-Propane-Diol (85%) | Multifunctional primary amine with very mild odor. Low-VOC (< 5g/L), more efficient than other low-VOC alkanolamines. Especially suitable on aluminium. |
| ALKATERGE®-E | 4-Ethyl-2-(8-Heptadecenyl)-2-Oxazoline-4-Methanol | Liquid corrosion inhibitor for iron and steel alloys. Low Foaming. Mild oxidative properties. Primary emulsion stabilizer for water-in-oil emulsions, secondary oil-in-water emulsifier. Non-ionic (stable in hard water). |
| CORRGUARD® SELECT series | 3-Amino-3-Methyl-2-Butanol (75% / 90% / 95%) | New primary amino alcohol with well-balanced performance that provides highly effective multi-metal compatibility and reduces cast iron corrosion, aluminum staining, and cobalt leaching. Highly efficient neutralizer with a high pKa, provides excellent pH stability and enhances microbial degradation resistance when used with registered biocides. |
| CORRGUARD® SELECT LSA series | 3-Amino-3-Methyl-2-Butanol (75% / 90% / 95%) | |
| CORRGUARD SELECT FS LSA | 2-Amino-2-Methyl-1-Propanol, 2-Amino-1-Butanol, 2-Methylamino-2-Methyl-1-Propanol, 2-Amino-2-Ethyl-1,3-Propanediol, 2-Amino-2-Methyl-1,3-Propanediol (88%) | |
| CORRGUARD® series | 2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%) | Very cost efficient neutralizer of acidic ingredients such as carboxylic acids and phosphate esters. Stable emulsion at high pH level with a high base strengh for an extended fluid life. Acts as formaldehyde scavenger. Minimal ammonia release. Minimizes leaching of cobalt and lead. |
| CORRGUARD® LSA series | 2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%) | High performance primary alkanolamine with very low secondary amine content (< 0.75%, meets TRGS 611). Stable emulsions at high pH. Minimal ammonia release, cobalt leaching and foam generation. High base strength. |
| CORRGUARD FS LSA | 2-Amino-2-Methyl-1-Propanol, 2-Amino-1-Butanol, 2-Methylamino-2-Methyl-1-Propanol, 2-Amino-2-Ethyl-1,3-Propanediol, 2-Amino-2-Methyl-1,3-Propanediol (88%) | Low secondary amine content multifunctional amino alcohol for improved aluminum staining performance. Providing efficient neutralization and pH stability. Relatively low viscosity and 100% water soluble. |
| CORRGUARD® FLEX | 2-Amino-1-Butanol,2-Amino-2-Ethyl-1,3-Propanediol (85%) | Unique primary amino alcohol stream suitable for low secondary amine formulations. Improved corrosion control on steel and its alloys. Extends fluid life with a wide range of registered biocides. Effective pH control, easy to handle and easy to formulate (100% water soluble). Meets TRGS 611. |
| CORRGUARD® EXT | 3-Amino-4-Octanol (85%) | Innovative premium neutralizer for Long-Life Metalworking Fluids. Excellent pH stability, low foam generation. Improves corrosion control of iron and steel alloys. Resists extraction into tramp oil. Facilitates formulation of Al-compatible fluids at higher pH. Excellent for low boron and boron-free formulations. Compliant with TRGS 611. |
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| LUVODUR® HVC 221 | Mixture of Native Fatty Acid Esters | Improves the wetting effect and lubricity of neat oils. Synergistic effects with EP/AW additives in the cutting oils. |
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| NA-LUBE® FM-1187 | Molybdenum Chemistry based on Organic type raw materials | Liquid molybdenum-based. Non-phosphorus and non-sulfur friction modifier. Good friction reducing and antiwear properties. Excellent shelf life stability. Limited solubility in Group III and PAO. |
| NA-LUBE® FM-1191 | Tungsten Chemistry based on Organic type raw materials | Liquid tungsten-based non-phosphorus, non-sulfur friction modifier. Good friction reducing properties. Synergistic with Mo-based FM and alkylated diphenylaminic antioxidants. Synergy with ZnDTP. Excellent shelf life stability. Limited solubility in Group III and PAO. |
| LUVODUR® FMX | 2-Ethylhexyl-Molybdenum Dithiophosphate | Improves anti-wear properties. Reduces friction in straight oils and greases. Good solubility in standard solvents and mineral oils. |
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| D.SYNOL® DS | Ethylene-Propylene-Copolymer | Increases energy efficiency and durability through high viscosity index and excellent resistance to low temperatures as well as heat/oxidation. Improves lubrication and enhances shear stability. Suitable for automotive and industrial lubricants as well as greases. Vk100: 40 / 100 / 600 / 1100 / 2000 mm²/s. |
| LUVODUR® PAO 400 | Poly-Alpha-Olefin | Conventional high viscose PAO (40 mm²/s at 100 °C). Good Viscosity Index and excellent low temperature properties. |
| LUVODUR® PAO 1000 | Poly-Alpha-Olefin | Conventional high voscose PAO (100 mm²/s at 100 °C) Good Viscosity Index and excellent low temperature properties. |
Lehmann&Voss - Organic Modifiers
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| LUVOTIX® R | Castor Oil Derivate | Thickener and anti-settling agent for various applications in non-aqueous organic systems. Controls the rheological properties of low and medium polar systems, process temperatures 35 to 55°C. Viscosity increase effect. |
| LUVOTIX® HP | Polyamide | Very fine micronised thickener and anti-settling agent. For solvent-based and solvent-free medium to high polar liquid organic systems, process temperatures 55 to 65°C. |
| LUVOTIX® P 25 X | Polyolefin/Xylene (25%) | Anti-settling paste without significant viscosity increase effect. For an extended range of polarities and process temperatures. Low to high polar systems, for solvent-based formulations. |
Lehmann&Voss - Inorganic Modifiers
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| LUVOGEL® 4 | Organically Modified Montmorillonite | Creates in formulations a shear thinning flow profile with thixotropic properties and a slight viscosity increase. Excellent for low to medium polar systems. Activator needed. |
| LUVOGEL 7 | Organically Modified Montmorillonite | Creates in formulations a shear thinning flow profile with thixotropic properties and a slight viscosity increase. Excellent for medium to high polar systems. Activator needed. |
| LUVOGEL W2N | Synthetic Na-Li-Mg-Silicate (Hectorite) | A strong shear thinning flow profile with thixotropic properties is achieved in water-based formulations. Easy dispersible and suitible for use in a wide pH-range. |
| Product | Chem. Description | Features and Benefits |
|---|---|---|
| TYZOR® BTP | n-Butylpolytitanate | Can act as inorganic binder alone or in combination with other metal oxide for mineral filled systems providing high temperature resistance. Low VOC content. |
| TYZOR® TnBT | Tetra-n-Butyltitanate | Very useful binder and adhesion promoter or cross-linker for OH- functional polymers, 100% active. Miscible in most organic solvents. |
| TYZOR® AA-105 | Titanium Acetylacetonate | Excellent as crosslinking agent for OH- functional polymers or binders, to promote adhesion or act as binder itself. Miscible in most organic solvents. Solvent free, 100% active. |
LUVOPLUS® DA 100 - From Emulsification to Multiphase Stabilization
Unique Green Formulation Additive for Aqueous and Non-aqueous Applications
Product Overview:
| Products | Description | Application |
|---|---|---|
| LUVOPLUS® DA 100 | LUVOPLUS® DA 100 is a multifunctional emulsifier / compatibilizer / dispersing additive based on a low molecular weight polymer with amphiphilic properties. | LUVOPLUS® DA 100 is characterized in particular by improving the emulsifiability and extending the storage stability of W/O and O/W emulsions. Furthermore, LUVOPLUS® DA 100 is particularly suitable both for dispersing organophilic bentonites (conventional phyllosilicates, e.g. LUVOGEL®) within the production of pre-gels and for dispersing and stabilizing inorganic pigments and particles in conventional/solvent-based coating systems. The (subsequent) use of LUVOPLUS® DA 100 in solvent-based or water-based base paints also improves the colorant acceptance and the compatibilization of pigment concentrates. Due to its special chemical structure, LUVOPLUS® DA 100 also has corrosion-inhibiting properties. |
You can obtain further information in our product brochure.